First fully working config and content for the site

21 files changed, 2451 insertions, 0 deletions

diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..94b7095
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,3 @@
+passwd
+
+log
diff --git a/apache2.conf b/apache2.conf
new file mode 100644
index 0000000..42389bd
--- /dev/null
+++ b/apache2.conf
@@ -0,0 +1,173 @@
+<VirtualHost spragg-ssl.co.uk:80>
+	# The ServerName directive sets the request scheme, hostname and port that
+	# the server uses to identify itself. This is used when creating
+	# redirection URLs. In the context of virtual hosts, the ServerName
+	# specifies what hostname must appear in the request's Host: header to
+	# match this virtual host. For the default virtual host (this file) this
+	# value is not decisive as it is used as a last resort host regardless.
+	# However, you must set it for any further virtual host explicitly.
+	ServerName spragg-ssl.co.uk
+
+	ServerAdmin webmaster@spragg-ssl.co.uk
+	DocumentRoot /srv/www/spragg-ssl.co.uk/html
+
+	# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
+	# error, crit, alert, emerg.
+	# It is also possible to configure the loglevel for particular
+	# modules, e.g.
+	#LogLevel info ssl:warn
+
+	# "it’s not safe to have two piped loggers writing to a logfile. The writes are not coordinated."
+	# https://publib.boulder.ibm.com/httpserv/ihsdiag/rotatelogs.html
+	ErrorLog "|/usr/bin/rotatelogs -l /srv/www/spragg-ssl.co.uk/log/http-error.%Y-%m-%d.log 86400"
+	CustomLog "|/usr/bin/rotatelogs -l /srv/www/spragg-ssl.co.uk/log/http-access.%Y-%m-%d.log 86400" combined
+
+	# For most configuration files from conf-available/, which are
+	# enabled or disabled at a global level, it is possible to
+	# include a line for only one particular virtual host. For example the
+	# following line enables the CGI configuration for this host only
+	# after it has been globally disabled with "a2disconf".
+	#Include conf-available/serve-cgi-bin.conf
+
+	# Redirect all requests for http://spragg-ssl.co.uk/... to https:...
+	RewriteEngine On
+	RewriteRule ^/(.*)$ https://spragg-ssl.co.uk/$1 [R,L]
+</VirtualHost>
+
+<VirtualHost spragg-ssl.co.uk:443>
+	ServerName spragg-ssl.co.uk
+
+	ServerAdmin webmaster@spragg-ssl.co.uk
+	DocumentRoot /srv/www/spragg-ssl.co.uk/html
+
+	# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
+	# error, crit, alert, emerg.
+	# It is also possible to configure the loglevel for particular
+	# modules, e.g.
+	#LogLevel info ssl:warn
+
+	# "it’s not safe to have two piped loggers writing to a logfile. The writes are not coordinated."
+	# https://publib.boulder.ibm.com/httpserv/ihsdiag/rotatelogs.html
+	ErrorLog "|/usr/bin/rotatelogs -l /srv/www/spragg-ssl.co.uk/log/https-error.%Y-%m-%d.log 86400"
+	CustomLog "|/usr/bin/rotatelogs -l /srv/www/spragg-ssl.co.uk/log/https-access.%Y-%m-%d.log 86400" combined
+
+	# For most configuration files from conf-available/, which are
+	# enabled or disabled at a global level, it is possible to
+	# include a line for only one particular virtual host. For example the
+	# following line enables the CGI configuration for this host only
+	# after it has been globally disabled with "a2disconf".
+	#Include conf-available/serve-cgi-bin.conf
+
+	#   SSL Engine Switch:
+	#   Enable/Disable SSL for this virtual host.
+	SSLEngine on
+
+	#   A self-signed (snakeoil) certificate can be created by installing
+	#   the ssl-cert package. See
+	#   /usr/share/doc/apache2/README.Debian.gz for more info.
+	#   If both key and certificate are stored in the same file, only the
+	#   SSLCertificateFile directive is needed.
+	SSLCertificateFile /etc/letsencrypt/live/spragg-ssl.co.uk/fullchain.pem
+	SSLCertificateKeyFile /etc/letsencrypt/live/spragg-ssl.co.uk/privkey.pem
+
+	#   Certificate Revocation Lists (CRL):
+	#   Set the CA revocation path where to find CA CRLs for client
+	#   authentication or alternatively one huge file containing all
+	#   of them (file must be PEM encoded)
+	#   Note: Inside SSLCARevocationPath you need hash symlinks
+	#		 to point to the certificate files. Use the provided
+	#		 Makefile to update the hash symlinks after changes.
+	#SSLCARevocationPath /etc/apache2/ssl.crl/
+	#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl
+
+	#   Client Authentication (Type):
+	#   Client certificate verification type and depth.  Types are
+	#   none, optional, require and optional_no_ca.  Depth is a
+	#   number which specifies how deeply to verify the certificate
+	#   issuer chain before deciding the certificate is not valid.
+	#SSLVerifyClient require
+	#SSLVerifyDepth  10
+
+	#   SSL Engine Options:
+	#   Set various options for the SSL engine.
+	#   o FakeBasicAuth:
+	#	 Translate the client X.509 into a Basic Authorisation.  This means that
+	#	 the standard Auth/DBMAuth methods can be used for access control.  The
+	#	 user name is the `one line' version of the client's X.509 certificate.
+	#	 Note that no password is obtained from the user. Every entry in the user
+	#	 file needs this password: `xxj31ZMTZzkVA'.
+	#   o ExportCertData:
+	#	 This exports two additional environment variables: SSL_CLIENT_CERT and
+	#	 SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
+	#	 server (always existing) and the client (only existing when client
+	#	 authentication is used). This can be used to import the certificates
+	#	 into CGI scripts.
+	#   o StdEnvVars:
+	#	 This exports the standard SSL/TLS related `SSL_*' environment variables.
+	#	 Per default this exportation is switched off for performance reasons,
+	#	 because the extraction step is an expensive operation and is usually
+	#	 useless for serving static content. So one usually enables the
+	#	 exportation for CGI and SSI requests only.
+	#   o OptRenegotiate:
+	#	 This enables optimized SSL connection renegotiation handling when SSL
+	#	 directives are used in per-directory context.
+	#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
+	<FilesMatch "\.(cgi|shtml|phtml|php)$">
+			SSLOptions +StdEnvVars
+	</FilesMatch>
+	<Directory /usr/lib/cgi-bin>
+			SSLOptions +StdEnvVars
+	</Directory>
+
+	#   SSL Protocol Adjustments:
+	#   The safe and default but still SSL/TLS standard compliant shutdown
+	#   approach is that mod_ssl sends the close notify alert but doesn't wait for
+	#   the close notify alert from client. When you need a different shutdown
+	#   approach you can use one of the following variables:
+	#   o ssl-unclean-shutdown:
+	#	 This forces an unclean shutdown when the connection is closed, i.e. no
+	#	 SSL close notify alert is send or allowed to received.  This violates
+	#	 the SSL/TLS standard but is needed for some brain-dead browsers. Use
+	#	 this when you receive I/O errors because of the standard approach where
+	#	 mod_ssl sends the close notify alert.
+	#   o ssl-accurate-shutdown:
+	#	 This forces an accurate shutdown when the connection is closed, i.e. a
+	#	 SSL close notify alert is send and mod_ssl waits for the close notify
+	#	 alert of the client. This is 100% SSL/TLS standard compliant, but in
+	#	 practice often causes hanging connections with brain-dead browsers. Use
+	#	 this only for browsers where you know that their SSL implementation
+	#	 works correctly.
+	#   Notice: Most problems of broken clients are also related to the HTTP
+	#   keep-alive facility, so you usually additionally want to disable
+	#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
+	#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
+	#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
+	#   "force-response-1.0" for this.
+	# BrowserMatch "MSIE [2-6]" \
+	#		nokeepalive ssl-unclean-shutdown \
+	#		downgrade-1.0 force-response-1.0
+
+	Header always set Strict-Transport-Security "max-age=31536000"
+
+	<Location /obs>
+		AuthType Basic
+		AuthName "Private area"
+		#AuthBasicProvider PAM
+		#AuthPAMService spragg-ssl
+		AuthBasicProvider file
+		AuthUserFile "/srv/www/spragg-ssl.co.uk/passwd"
+		Require valid-user
+	</Location>
+
+	# Add extra alias for the icons directory
+	Alias /icons /usr/share/icons
+	<Directory "/usr/share/icons/">
+		Options FollowSymLinks MultiViews
+	</Directory>
+
+	# Enable user-dirs
+	UserDir public_html
+
+	# Enable the STAG trac instance over WSGI
+	WSGIScriptAlias /c/STAG/trac /srv/www/spragg-ssl.co.uk/html/c/STAG/trac/cgi-bin/trac.wsgi
+</VirtualHost>
diff --git a/awstats/.gitignore b/awstats/.gitignore
new file mode 100644
index 0000000..729fb12
--- /dev/null
+++ b/awstats/.gitignore
@@ -0,0 +1,2 @@
+data
+html
diff --git a/awstats/awstats b/awstats/awstats
new file mode 120000
index 0000000..455b5e2
--- /dev/null
+++ b/awstats/awstats
@@ -0,0 +1 @@
+/usr/bin/awstats
\ No newline at end of file
diff --git a/awstats/awstats.conf b/awstats/awstats.conf
new file mode 100644
index 0000000..29ea9e1
--- /dev/null
+++ b/awstats/awstats.conf
@@ -0,0 +1,1597 @@
+# AWSTATS CONFIGURE FILE 7.3
+#-----------------------------------------------------------------------------
+# Copy this file into awstats.www.mydomain.conf and edit this new config file
+# to setup AWStats (See documentation in docs/ directory).
+# The config file must be in /etc/awstats, /usr/local/etc/awstats or /etc (for
+# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/Linux...)
+# To include an environment variable in any parameter (AWStats will replace
+# it with its value when reading it), follow the example:
+# Parameter="__ENVNAME__"
+# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
+# the config value in an AWStats running session and can be used like others.
+#-----------------------------------------------------------------------------
+
+
+
+#-----------------------------------------------------------------------------
+# MAIN SETUP SECTION (Required to make AWStats work)
+#-----------------------------------------------------------------------------
+
+# "LogFile" contains the web, ftp or mail server log file to analyze.
+# Possible values: A full path, or a relative path from awstats.pl directory.
+# Example: "/var/log/apache/access.log"
+# Example: "../logs/mycombinedlog.log"
+# You can also use tags in this filename if you need a dynamic file name
+# depending on date or time (Replacement is made by AWStats at the beginning
+# of its execution). This is available tags :
+#   %YYYY-n  is replaced with 4 digits year we were n hours ago
+#   %YY-n    is replaced with 2 digits year we were n hours ago
+#   %MM-n    is replaced with 2 digits month we were n hours ago
+#   %MO-n    is replaced with 3 letters month we were n hours ago
+#   %DD-n    is replaced with day we were n hours ago
+#   %HH-n    is replaced with hour we were n hours ago
+#   %NS-n    is replaced with number of seconds at 00:00 since 1970
+#   %WM-n    is replaced with the week number in month (1-5)
+#   %Wm-n    is replaced with the week number in month (0-4)
+#   %WY-n    is replaced with the week number in year (01-52)
+#   %Wy-n    is replaced with the week number in year (00-51)
+#   %DW-n    is replaced with the day number in week (1-7, 1=sunday)
+#                              use n=24 if you need (1-7, 1=monday)
+#   %Dw-n    is replaced with the day number in week (0-6, 0=sunday)
+#                              use n=24 if you need (0-6, 0=monday)
+#   Use 0 for n if you need current year, month, day, hour...
+# Example: "/var/log/access_log.%YYYY-0%MM-0%DD-0.log"
+# Example: "C:/WINNT/system32/LogFiles/W3SVC1/ex%YY-24%MM-24%DD-24.log"
+# You can also use a pipe if log file come from a pipe :
+# Example: "gzip -cd /var/log/apache/access.log.gz |"
+# If there are several log files from load balancing servers :
+# Example: "/pathtotools/logresolvemerge.pl *.log |"
+#
+LogFile="/srv/www/spragg-ssl.co.uk/log/https-access.%YYYY-24-%MM-24-%DD-24.log"
+
+
+# Enter the log file type you want to analyze.
+# Possible values:
+#  W - For a web log file
+#  S - For a streaming log file
+#  M - For a mail log file
+#  F - For a ftp log file
+# Example: W
+# Default: W
+#
+LogType=W
+
+
+# Enter here your log format (Must match your web server config. See setup
+# instructions in documentation to know how to configure your web server to
+# have the required log format).
+# Possible values: 1,2,3,4 or "your_own_personalized_log_format"
+# 1 - Apache or Lotus Notes/Domino native combined log format (NCSA combined/XLF/ELF log format)
+# 2 - IIS or ISA format (IIS W3C log format). See FAQ-COM115 For ISA.
+# 3 - Webstar native log format.
+# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
+#     With LogFormat=4, some features (browsers, os, keywords...) can't work.
+# "your_own_personalized_log_format" = If your log is ftp, mail or other format,
+#     you must use following keys to define the log format string (See FAQ for
+#     ftp, mail or exotic web log format examples):
+#   %host             Client hostname or IP address (or Sender host for mail log)
+#   %host_r           Receiver hostname or IP address (for mail log)
+#   %lognamequot      Authenticated login/user with format: "john"
+#   %logname          Authenticated login/user with format: john
+#   %time1            Date and time with format: [dd/mon/yyyy:hh:mm:ss +0000] or [dd/mon/yyyy:hh:mm:ss]
+#   %time2            Date and time with format: yyyy-mm-dd hh:mm:ss
+#   %time3            Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
+#   %time4            Date and time with unix timestamp format: dddddddddd
+#   %time5            Date and time with format iso: yyyy-mm-ddThh:mm:ss, with optional timezone specification (ignored)
+#   %methodurl        Method and URL with format: "GET /index.html HTTP/x.x"
+#   %methodurlnoprot  Method and URL with format: "GET /index.html"
+#   %method           Method with format: GET
+#   %url              URL only with format: /index.html
+#   %query            Query string (used by URLWithQuery option)
+#   %code             Return code status (with format for web log: 999)
+#   %bytesd           Size of document in bytes
+#   %refererquot      Referer page with format: "http://from.com/from.htm"
+#   %referer          Referer page with format: http://from.com/from.htm
+#   %uabracket        User agent with format: [Mozilla/4.0 (compatible, ...)]
+#   %uaquot           User agent with format: "Mozilla/4.0 (compatible, ...)"
+#   %ua               User agent with format: Mozilla/4.0_(compatible...)
+#   %gzipin           mod_gzip compression input bytes: In:XXX
+#   %gzipout          mod_gzip compression output bytes & ratio: Out:YYY:ZZpct.
+#   %gzipratio        mod_gzip compression ratio: ZZpct.
+#   %deflateratio     mod_deflate compression ratio with format: (ZZ)
+#   %email            EMail sender (for mail log)
+#   %email_r          EMail receiver (for mail log)
+#   %virtualname      Web sever virtual hostname. Use this tag when same log
+#                     contains data of several virtual web servers. AWStats
+#                     will discard records not in SiteDomain nor HostAliases
+#   %cluster          If log file is provided from several computers (merged by
+#                     logresolvemerge.pl), use this to define cluster id field.
+#   %extraX           Another field that you plan to use for building a
+#                     personalized report with ExtraSection feature (See later).
+#   If your log format has some fields not included in this list, use:
+#   %other            Means another not used field
+#   %otherquot        Means another not used double quoted field
+#   If your log format has some literal strings, which precede data fields, use
+#   status=%code      Means your log files have HTTP status logged as "status=200"
+#   Literal strings that follow data field must be separated from said data fields by space.
+#
+# Examples for Apache combined logs (following two examples are equivalent):
+# LogFormat = 1
+# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"
+#
+# Example for IIS:
+# LogFormat = 2
+#
+LogFormat=1
+
+
+# If your log field's separator is not a space, you can change this parameter.
+# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
+# Backslash can be used as escape character.
+# Example: " "
+# Example: "\t"
+# Example: "\|"
+# Example: ","
+# Default: " "
+#
+LogSeparator=" "
+
+
+# "SiteDomain" must contain the main domain name, or the main intranet web
+# server name, used to reach the web site.
+# If you share the same log file for several virtual web servers, this
+# parameter is used to tell AWStats to filter record that contains records for
+# this virtual host name only (So check that this virtual hostname can be
+# found in your log file and use a personalized log format that include the
+# %virtualname tag).
+# But for multi hosting a better solution is to have one log file for each
+# virtual web server. In this case, this parameter is only used to generate
+# full URL's links when ShowLinksOnUrl option is set to 1.
+# If analyzing mail log, enter here the domain name of mail server.
+# Example: "myintranetserver"
+# Example: "www.domain.com"
+# Example: "ftp.domain.com"
+# Example: "domain.com"
+#
+SiteDomain="spragg-ssl.co.uk"
+
+
+# Enter here all other possible domain names, addresses or virtual host
+# aliases someone can use to access your site. Try to keep only the minimum
+# number of possible names/addresses to have the best performances.
+# You can repeat the "SiteDomain" value in this list.
+# This parameter is used to analyze referer field in log file and to help
+# AWStats to know if a referer URL is a local URL of same site or an URL of
+# another site.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Note: You can also use @/mypath/myfile if list of aliases are in a file.
+# Example: "www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"
+#
+HostAliases="spragg-ssl.co.uk"
+
+
+# If you want to have hosts reported by name instead of ip address, AWStats
+# need to make reverse DNS lookups (if not already done in your log file).
+# With DNSLookup to 0, all hosts will be reported by their IP addresses and
+# not by the full hostname of visitors (except if names are already available
+# in log file).
+# If you want/need to set DNSLookup to 1, don't forget that this will reduce
+# dramatically AWStats update process speed. Do not use on large web sites.
+# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
+# Note: Result of DNS Lookup can be used to build the Country report. However
+# it is highly recommanded to enable the plugin 'geoip' or 'geoipfree' to
+# have an accurate Country report with no need of DNS Lookup.
+# Possible values:
+# 0 - No DNS Lookup
+# 1 - DNS Lookup is fully enabled
+# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
+# Default: 2
+#
+DNSLookup=0
+
+
+# For very large sites, setting DNSLookup to 0 (or 2) might be the only
+# reasonable choice. DynamicDNSLookup allows to resolve host names for
+# items shown in html tables only, when data is output on reports instead
+# of resolving once during log analysis step.
+# Possible values:
+# 0 - No dynamic DNS lookup
+# 1 - Dynamic DNS lookup enabled
+# 2 - Dynamic DNS lookup enabled (including static DNS cache file as a second
+#     source)
+# Default: 0
+#
+DynamicDNSLookup=0
+
+
+# When AWStats updates its statistics, it stores results of its analysis in
+# files (AWStats database). All those files are written in the directory
+# defined by the "DirData" parameter. Set this value to the directory where
+# you want AWStats to save its database and working files into.
+# Warning: If you want to be able to use the "AllowToUpdateStatsFromBrowser"
+# feature (see later), you need "Write" permissions by web server user on this
+# directory (and "Modify" for Windows NTFS file systems).
+# Example: "/var/lib/awstats"
+# Example: "../data"
+# Example: "C:/awstats_data_dir"
+# Default: "."          (means same directory as awstats.pl)
+#
+DirData="/srv/www/spragg-ssl.co.uk/awstats/data"
+
+
+# Relative or absolute web URL of your awstats cgi-bin directory.
+# This parameter is used only when AWStats is run from command line
+# with -output option (to generate links in HTML reported page).
+# Example: "/awstats"
+# Default: "/cgi-bin"   (means awstats.pl is in "/yourwwwroot/cgi-bin")
+#
+DirCgi="/cgi-bin"
+
+
+# Relative or absolute web URL of your awstats icon directory.
+# If you build static reports ("... -output > outputpath/output.html"), enter
+# path of icon directory relative to the output directory 'outputpath'.
+# Example: "/awstatsicons"
+# Example: "../icon"
+# Default: "/icon" (means you must copy icon directories in "/mywwwroot/icon")
+#
+DirIcons="/obs/awstats-icon"
+
+
+# When this parameter is set to 1, AWStats adds a button on report page to
+# allow to "update" statistics from a web browser. Warning, when "update" is
+# made from a browser, AWStats is run as a CGI by the web server user defined
+# in your web server (user "nobody" by default with Apache, "IUSR_XXX" with
+# IIS), so the "DirData" directory and all already existing history files
+# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
+# necessary to "Read/Write" (and "Modify" for Windows NTFS file systems).
+# Warning: Update process can be long so you might experience "time out"
+# browser errors if you don't launch AWStats frequently enough.
+# When set to 0, update is only made when AWStats is run from the command
+# line interface (or a task scheduler).
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowToUpdateStatsFromBrowser=0
+
+
+# AWStats saves and sorts its database on a month basis (except if using
+# databasebreak option from command line).
+# However, if you choose the -month=all from command line or
+# value '-Year-' from CGI combo form to have a report for all year, AWStats
+# needs to reload all data for full year (each month), and sort them,
+# requiring a large amount of time, memory and CPU. This might be a problem
+# for web hosting providers that offer AWStats for large sites, on shared
+# servers, to non CPU cautious customers.
+# For this reason, the 'full year' is only enabled on Command Line by default.
+# You can change this by setting this parameter to 0, 1, 2 or 3.
+# Possible values:
+#  0 - Never allowed
+#  1 - Allowed on CLI only, -Year- value in combo is not visible
+#  2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
+#  3 - Possible on CLI and CGI
+# Default: 2
+#
+AllowFullYearView=2
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL SETUP SECTION (Not required but enhances AWStats's functionality)
+#-----------------------------------------------------------------------------
+
+# When the update process runs, AWStats can set a lock file in TEMP or TMP
+# directory. This lock is to avoid to have 2 update processes running at the
+# same time to prevent unknown conflicts problems and avoid DoS attacks when
+# AllowToUpdateStatsFromBrowser is set to 1.
+# Because, when you use lock file, you can experience sometimes problems in
+# lock file not correctly removed (killed process for example requires that
+# you remove the file manualy), this option is not enabled by default (Do
+# not enable this option with no console server access).
+# Change : Effective immediately
+# Possible values: 0 or 1
+# Default: 0
+#
+EnableLockForUpdate=0
+
+
+# AWStats can do reverse DNS lookups through a static DNS cache file that was
+# previously created manually. If no path is given in static DNS cache file
+# name, AWStats will search DirData directory. This file is never changed.
+# This option is not used if DNSLookup=0.
+# Note: DNS cache file format is 'minsince1970 ipaddress resolved_hostname'
+# or just 'ipaddress resolved_hostname'
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscache"
+# Default: "dnscache.txt"
+#
+DNSStaticCacheFile="dnscache.txt"
+
+
+# AWStats can do reverse DNS lookups through a DNS cache file that was created
+# by a previous run of AWStats. This file is erased and recreated after each
+# statistics update process. You don't need to create and/or edit it.
+# AWStats will read and save this file in DirData directory.
+# This option is used only if DNSLookup=1.
+# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
+# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
+# Change : Effective for new updates only
+# Example: "/mydnscachedir/dnscachelastupdate"
+# Default: "dnscachelastupdate.txt"
+#
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+
+
+# You can specify specific IP addresses that should NOT be looked up in DNS.
+# This option is used only if DNSLookup=1.
+# Note: Use space between each value.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "123.123.123.123 REGEX[^192\.168\.]"
+# Default: ""
+#
+SkipDNSLookupFor=""
+
+
+# The following two parameters allow you to protect a config file from being
+# read by AWStats when called from a browser if the web user has not been
+# authenticated. Your AWStats program must be in a web protected "realm" (With
+# Apache, you can use .htaccess files to do so. With other web servers, see
+# your server setup manual).
+# Change : Effective immediately
+# Possible values: 0 or 1
+# Default: 0
+#
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+
+
+# This parameter gives the list of all authorized authenticated users to view
+# statistics for this domain/config file. This parameter is used only if
+# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
+# Change : Effective immediately
+# Example: "user1 user2"
+# Example: "__REMOTE_USER__"
+# Default: ""
+#
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+
+
+# When this parameter is defined to something, the IP address of the user that
+# reads its statistics from a browser (when AWStats is used as a CGI) is
+# checked and must match one of the IP address values or ranges.
+# Change : Effective immediately
+# Example: "127.0.0.1 123.123.123.1-123.123.123.255"
+# Default: ""
+#
+AllowAccessFromWebToFollowingIPAddresses=""
+
+
+# If the "DirData" directory (see above) does not exist, AWStats return an
+# error. However, you can ask AWStats to create it.
+# This option can be used by some Web Hosting Providers that has defined a
+# dynamic value for DirData (for example DirData="/home/__REMOTE_USER__") and
+# don't want to have to create a new directory each time they add a new user.
+# Change : Effective immediately
+# Possible values: 0 or 1
+# Default: 0
+#
+CreateDirDataIfNotExists=0
+
+
+# You can choose in which format the Awstats history database is saved.
+# Note: Using "xml" format make AWStats building database files three times
+# larger than using "text" format.
+# Change : Database format is switched after next update
+# Possible values: text or xml
+# Default: text
+#
+BuildHistoryFormat=text
+
+
+# If you prefer having the report output pages be built as XML compliant pages
+# instead of simple HTML pages, you can set this to 'xhtml' (May not work
+# properly with old browsers).
+# Change : Effective immediately
+# Possible values: html or xhtml
+# Default: html
+#
+BuildReportFormat=html
+
+
+# AWStats databases can be updated from command line of from a browser (when
+# used as a cgi program). So AWStats database files need write permission
+# for both command line user and default web server user (nobody for Unix,
+# IUSR_xxx for IIS/Windows,...).
+# To avoid permission problems between update process (run by an admin user)
+# and CGI process (ran by a low level user), AWStats can save its database
+# files with read and write permissions for everyone.
+# By default, AWStats keeps default user permissions on updated files. If you
+# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+SaveDatabaseFilesWithPermissionsForEveryone=0
+
+
+# AWStats can purge log file, after analyzing it. Note that AWStats is able
+# to detect new lines in a log file, to process only them, so you can launch
+# AWStats as often as you want, even with this parameter to 0.
+# With 0, no purge is made, so you must use a scheduled task or a web server
+# that make this purge frequently.
+# With 1, the purge of the log file is made each time AWStats update is run.
+# This parameter doesn't work with IIS (This web server doesn't let its log
+# file to be purged).
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+PurgeLogFile=0
+
+
+# When PurgeLogFile is setup to 1, AWStats will clean your log file after
+# processing it. You can however keep an archive file of all processed log
+# records by setting this parameter (For example if you want to use another
+# log analyzer). The archived log file is saved in "DirData" with name
+# awstats_archive.configname[.suffix].log
+# This parameter is not used if PurgeLogFile=0
+# Change : Effective for new updates only
+# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
+# Example: 1
+# Example: %YYYY%MM%DD
+# Default: 0
+#
+ArchiveLogRecords=0
+
+
+# Each time you run the update process, AWStats overwrites the 'historic file'
+# for the month (awstatsMMYYYY[.*].txt) with the updated one.
+# When write errors occurs (IO, disk full,...), this historic file can be
+# corrupted and must be deleted. Because this file contains information of all
+# past processed log files, you will loose old stats if removed. So you can
+# ask AWStats to save last non corrupted file in a .bak file. This file is
+# stored in "DirData" directory with other 'historic files'.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+KeepBackupOfHistoricFiles=0
+
+
+# Default index page name for your web server.
+# Change : Effective for new updates only
+# Example: "index.php index.html default.html"
+# Default: "index.php index.html"
+#
+DefaultFile="index.php index.html"
+
+
+# Do not include access from clients that match following criteria.
+# If your log file contains IP addresses in host field, you must enter here
+# matching IP addresses criteria.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "SkipHosts" is "OnlyHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Example: "localhost REGEX[^.*\.localdomain$]"
+# Default: ""
+#
+SkipHosts=""
+
+
+# Do not include access from clients with a user agent that match following
+# criteria. If you want to exclude a robot, you should update the robots.pm
+# file instead of this parameter.
+# The opposite parameter of "SkipUserAgents" is "OnlyUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "konqueror REGEX[ua_test_v\d\.\d]"
+# Default: ""
+#
+SkipUserAgents=""
+
+
+# Use SkipFiles to ignore access to URLs that match one of following entries.
+# You can enter a list of not important URLs (like framed menus, hidden pages,
+# etc...) to exclude them from statistics. You must enter here exact relative
+# URL as found in log file, or a matching REGEX value. Check apply on URL with
+# all its query paramaters.
+# For example, to ignore /badpage.php, just add "/badpage.php". To ignore all
+# pages in a particular directory, add "REGEX[^\/directorytoexclude]".
+# The opposite parameter of "SkipFiles" is "OnlyFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "/badpage.php /page.php?param=x REGEX[^\/excludedirectory]"
+# Default: ""
+#
+SkipFiles=""
+
+
+# Use SkipReferrersBlackList if you want to exclude records coming from a SPAM
+# referrer. Parameter must receive a local file name containing rules applied
+# on referrer field. If parameter is empty, no filter is applied.
+# An example of such a file is available in lib/blacklist.txt
+# Change : Effective for new updates only
+# Example: "/mylibpath/blacklist.txt"
+# Default: ""
+#
+# WARNING!! Using this feature make AWStats running very slower (5 times slower
+# with black list file provided with AWStats !
+#
+SkipReferrersBlackList=""
+
+
+# Include in stats, only accesses from hosts that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular hosts, you can add those host names in
+# this parameter.
+# If DNS lookup is already done in your log file, you must enter here hostname
+# criteria, else enter ip address criteria.
+# The opposite parameter of "OnlyHosts" is "SkipHosts".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"
+# Default: ""
+#
+OnlyHosts=""
+
+
+# Include in stats, only accesses from user agent that match one of following
+# entries. For example, if you want AWStats to filter access to keep only
+# stats for visits from particular browsers, you can add their user agents
+# string in this parameter.
+# The opposite parameter of "OnlyUserAgents" is "SkipUserAgents".
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "msie"
+# Default: ""
+#
+OnlyUserAgents=""
+
+
+# Include in stats, only accesses from authenticated users that match one of
+# following entries. For example, if you want AWStats to filter access to keep
+# only stats for authenticated users, you can add those users names in
+# this parameter. Useful for statistics for per user ftp logs.
+# Note: Use space between each value. This parameter is not case sensitive.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "john bob REGEX[^testusers]"
+# Default: ""
+#
+OnlyUsers=""
+
+
+# Include in stats, only accesses to URLs that match one of following entries.
+# For example, if you want AWStats to filter access to keep only stats that
+# match a particular string, like a particular directory, you can add this
+# directory name in this parameter.
+# The opposite parameter of "OnlyFiles" is "SkipFiles".
+# Note: Use space between each value. This parameter is or not case sensitive
+# depending on URLNotCaseSensitive parameter.
+# Note: You can use regular expression values writing value with REGEX[value].
+# Change : Effective for new updates only
+# Example: "REGEX[marketing_directory] REGEX[office\/.*\.(csv|sxw)$]"
+# Default: ""
+#
+OnlyFiles=""
+
+
+# Add here a list of kind of url (file extension) that must be counted as
+# "Hit only" and not as a "Hit" and "Page/Download". You can set here all
+# image extensions as they are hit downloaded that must be counted but they
+# are not viewed pages. URLs with such extensions are not included in the TOP
+# Pages/URL report.
+# Note: If you want to exclude particular URLs from stats (No Pages and no
+# Hits reported), you must use SkipFiles parameter.
+# Change : Effective for new updates only
+# Example: "css js class gif jpg jpeg png bmp ico rss xml swf zip arj rar gz z bz2 wav mp3 wma mpg avi"
+# Example: ""
+# Default: "css js class gif jpg jpeg png bmp ico rss xml swf eot woff woff2"
+#
+NotPageList="css js class gif jpg jpeg png bmp ico rss xml swf eot woff woff2"
+
+
+# By default, AWStats considers that records found in web log file are
+# successful hits if HTTP code returned by server is a valid HTTP code (200
+# and 304). Any other code are reported in HTTP status chart.
+# Note that HTTP 'control codes', like redirection (302, 305) are not added by
+# default in this list as they are not pages seen by a visitor but are
+# protocol exchange codes to tell the browser to ask another page. Because
+# this other page will be counted and seen with a 200 or 304 code, if you
+# add such codes, you will have 2 pages viewed reported for only one in facts.
+# Change : Effective for new updates only
+# Example: "200 304 302 305"
+# Default: "200 304"
+#
+ValidHTTPCodes="200 304"
+
+
+# By default, AWStats considers that records found in mail log file are
+# successful mail transfers if field that represent return code in analyzed
+# log file match values defined by this parameter.
+# Change : Effective for new updates only
+# Example: "1 250 200"
+# Default: "1 250"
+#
+ValidSMTPCodes="1 250"
+
+
+# By default, AWStats only records info on 404 'Document Not Found' errors.
+# At the cost of additional processing time, further info pages can be made
+# available by adding codes below.
+# Change : Effective for new updates only
+# Example: "403 404"
+# Default: "404"
+#
+TrapInfosForHTTPErrorCodes = "400 403 404"
+
+
+# Some web servers on some Operating systems (IIS-Windows) consider that a
+# login with same value but different case are the same login. To tell AWStats
+# to also consider them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+AuthenticatedUsersNotCaseSensitive=0
+
+
+# Some web servers on some Operating systems (IIS-Windows) considers that two
+# URLs with same value but different case are the same URL. To tell AWStats to
+# also considers them as one, set this parameter to 1.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLNotCaseSensitive=0
+
+
+# Keep or remove the anchor string you can find in some URLs.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+URLWithAnchor=0
+
+
+# In URL links, "?" char is used to add parameter's list in URLs. Syntax is:
+# /mypage.html?param1=value1&param2=value2
+# However, some servers/sites use also other chars to isolate dynamic part of
+# their URLs. You can complete this list with all such characters.
+# Change : Effective for new updates only
+# Example: "?;,"
+# Default: "?;"
+#
+URLQuerySeparators="?;"
+
+
+# Keep or remove the query string to the URL in the statistics for individual
+# pages. This is primarily used to differentiate between the URLs of dynamic
+# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as two
+# different pages.
+# Warning, when set to 1, memory required to run AWStats is dramatically
+# increased if you have a lot of changing URLs (for example URLs with a random
+# id inside). Such web sites should not set this option to 1 or use seriously
+# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually
+# URLWithQueryWithoutFollowingParameters).
+# Change : Effective for new updates only
+# Possible values:
+# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used     (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+#
+URLWithQuery=0
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to keep only parameters
+# you need (if you know them) before counting, manipulating and storing URL.
+# Enter here list of wanted parameters. For example, with "param", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithoutFollowingParameters.
+# Change : Effective for new updates only
+# Example: "param"
+# Default: ""
+#
+URLWithQueryWithOnlyFollowingParameters=""
+
+
+# When URLWithQuery is on, you will get the full URL with all parameters in
+# URL reports. But among thoose parameters, sometimes you don't need a
+# particular parameter because it does not identify the page or because it's
+# a random ID changing for each access even if URL points to same page. In
+# such cases, it is higly recommanded to ask AWStats to remove such parameters
+# from the URL before counting, manipulating and storing URL. Enter here list
+# of all non wanted parameters. For example if you enter "id", one hit on
+# /mypage.cgi?param=abc&id=Yo4UomP9d  and  /mypage.cgi?param=abc&id=Mu8fdxl3r
+# will be reported as 2 hits on /mypage.cgi?param=abc
+# This parameter is not used when URLWithQuery is 0 and can't be used with
+# URLWithQueryWithOnlyFollowingParameters.
+# Change : Effective for new updates only
+# Example: "PHPSESSID jsessionid"
+# Default: ""
+#
+URLWithQueryWithoutFollowingParameters=""
+
+
+# Keep or remove the query string to the referrer URL in the statistics for
+# external referrer pages. This is used to differentiate between the URLs of
+# dynamic referrer pages. If set to 1, mypage.html?id=x and mypage.html?id=y
+# are counted as two different referrer pages.
+# Change : Effective for new updates only
+# Possible values:
+# 0 - Referrer URLs are cleaned from the query string (ie: "/mypage.html")
+# 1 - Full URL with query string is used      (ie: "/mypage.html?p=x&q=y")
+# Default: 0
+#
+URLReferrerWithQuery=0
+
+
+# AWStats can detect setup problems or show you important informations to have
+# a better use. Keep this to 1, except if AWStats says you can change it.
+# Change : Effective immediately
+# Possible values: 0 or 1
+# Default: 1
+#
+WarningMessages=1
+
+
+# When an error occurs, AWStats outputs a message related to errors. If you
+# want (in most cases for security reasons) to have no error messages, you
+# can set this parameter to your personalized generic message.
+# Change : Effective immediately
+# Example: "An error occurred. Contact your Administrator"
+# Default: ""
+#
+ErrorMessages=""
+
+
+# AWStat can be run with debug=x parameter to output various informations
+# to help in debugging or solving troubles. If you want to allow this (not
+# enabled by default for security reasons), set this parameter to 0.
+# Change : Effective immediately
+# Possible values: 0 or 1
+# Default: 0
+#
+DebugMessages=0
+
+
+# To help you to detect if your log format is good, AWStats reports an error
+# if all the first NbOfLinesForCorruptedLog lines have a format that does not
+# match the LogFormat parameter.
+# However, some worm virus attack on your web server can result in a very high
+# number of corrupted lines in your log. So if you experience awstats stop
+# because of bad virus records at the beginning of your log file, you can
+# increase this parameter (very rare).
+# Change : Effective for new updates only
+# Default: 50
+#
+NbOfLinesForCorruptedLog=50
+
+
+# For some particular integration needs, you may want to have CGI links to
+# point to another script than awstats.pl.
+# Use the name of this script in WrapperScript parameter.
+# Change : Effective immediately
+# Example: "awstatslauncher.pl"
+# Example: "awstatswrapper.cgi?key=123"
+# Default: ""
+#
+WrapperScript=""
+
+
+# DecodeUA must be set to 1 if you use Roxen web server. This server converts
+# all spaces in user agent field into %20. This make the AWStats robots, OS
+# and browsers detection fail in some cases. Just change it to 1 if and only
+# if your web server is Roxen.
+# Change : Effective for new updates only
+# Possible values: 0 or 1
+# Default: 0
+#
+DecodeUA=0
+
+
+# MiscTrackerUrl can be used to make AWStats able to detect some miscellaneous
+# things, that can not be tracked on other way, like:
+# - Javascript disabled
+# - Java enabled
+# - Screen size
+# - Color depth
+# - Macromedia Director plugin
+# - Macromedia Shockwave plugin
+# - Realplayer G2 plugin
+# - QuickTime plugin
+# - Mediaplayer plugin
+# - Acrobat PDF plugin
+# To enable all these features, you must copy the awstats_misc_tracker.js file
+# into a /js/ directory stored in your web document root and add the following
+# HTML code at the end of your index page (but before </BODY>) :
+#
+# <script type="text/javascript" src="/js/awstats_misc_tracker.js"></script>
+# <noscript><img src="/js/awstats_misc_tracker.js?nojs=y" height=0 width=0 border=0 style="display: none"></noscript>
+#
+# If code is not added in index page, all those detection capabilities will be
+# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
+# parameters are set to 1 to make results appear in AWStats report page.
+# If you want to use another directory than /js/, you must also change the
+# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
+# Change : Effective for new updates only.
+# Possible value: URL of javascript tracker file added in your HTML code.
+# Default: "/js/awstats_misc_tracker.js"
+#
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+
+
+# AddLinkToExternalCGIWrapper can be used to add a link to a wrapper script
+# into each title of Dolibarr reports. This can be used to add a wrapper
+# to download data into a CSV file for example.
+#
+# AddLinkToExternalCGIWrapper="/awstats/awdownloadcsv.pl"
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# The following values allow you to define accuracy of AWStats entities
+# (robots, browsers, os, referers, file types) detection.
+# It might be a good idea for large web sites or ISP that provides AWStats to
+# high number of customers, to set this parameter to 1 (or 0), instead of 2.
+# Possible values:
+#    0      = No detection,
+#    1      = Medium/Standard detection
+#    2      = Full detection
+# Change : Effective for new updates only
+# Note   : LevelForBrowsersDetection can also accept value "allphones". This
+#          enable detailed detection of phone/pda browsers.
+# Default: 2 (0 for LevelForWormsDetection)
+#
+LevelForBrowsersDetection=2         # 0 disables Browsers detection.
+                                    # 2 reduces AWStats speed by 2%
+                                    # allphones reduces AWStats speed by 5%
+LevelForOSDetection=2               # 0 disables OS detection.
+                                    # 2 reduces AWStats speed by 3%
+LevelForRefererAnalyze=2            # 0 disables Origin detection.
+                                    # 2 reduces AWStats speed by 14%
+LevelForRobotsDetection=2           # 0 disables Robots detection.
+                                    # 2 reduces AWStats speed by 2.5%
+LevelForSearchEnginesDetection=2    # 0 disables Search engines detection.
+                                    # 2 reduces AWStats speed by 9%
+LevelForKeywordsDetection=2         # 0 disables Keyphrases/Keywords detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForFileTypesDetection=2        # 0 disables File types detection.
+                                    # 2 reduces AWStats speed by 1%
+LevelForWormsDetection=0            # 0 disables Worms detection.
+                                    # 2 reduces AWStats speed by 15%
+
+
+
+#-----------------------------------------------------------------------------
+# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
+#-----------------------------------------------------------------------------
+
+# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
+# Frames are only available for report viewed dynamically. When you build
+# pages from command line, this option is not used and no frames are built.
+# Possible values: 0 or 1
+# Default: 1
+#
+UseFramesWhenCGI=1
+
+
+# This parameter asks your browser to open detailed reports into a different
+# window than the main page.
+# Possible values:
+# 0 - Open all in same browser window
+# 1 - Open detailed reports in another window except if using frames
+# 2 - Open always in a different window even if reports are framed
+# Default: 1
+#
+DetailedReportsOnNewWindows=1
+
+
+# You can add, in the HTML report page, a cache lifetime (in seconds) that
+# will be returned to the browser in HTTP header answer by server.
+# This parameter is not used when reports are built with -staticlinks option.
+# Example: 3600
+# Default: 0
+#
+Expires=0
+
+
+# To avoid too large web pages, you can ask AWStats to limit number of rows of
+# all reported charts to this number when no other limits apply.
+# Default: 10000
+#
+MaxRowsInHTMLOutput=10000
+
+
+# Set your primary language (ISO-639-1 language codes).
+# Possible values:
+#  Albanian=al, Bosnian=ba, Bulgarian=bg, Catalan=ca,
+#  Chinese (Taiwan)=tw, Chinese (Simpliefied)=cn, Croatian=hr, Czech=cz,
+#  Danish=dk, Dutch=nl, English=en, Estonian=et, Euskara=eu, Finnish=fi,
+#  French=fr, Galician=gl, German=de, Greek=gr, Hebrew=he, Hungarian=hu,
+#  Icelandic=is, Indonesian=id, Italian=it, Japanese=jp, Korean=ko,
+#  Latvian=lv, Norwegian (Nynorsk)=nn, Norwegian (Bokmal)=nb, Polish=pl,
+#  Portuguese=pt, Portuguese (Brazilian)=br, Romanian=ro, Russian=ru,
+#  Serbian=sr, Slovak=sk, Slovenian=si, Spanish=es, Swedish=se, Turkish=tr,
+#  Ukrainian=ua, Welsh=cy.
+#  First available language accepted by browser=auto
+# Default: "auto"
+#
+Lang="auto"
+
+
+# Set the location of language files.
+# Example: "/usr/share/awstats/lang"
+# Default: "./lang" (means lang directory is in same location than awstats.pl)
+#
+DirLang="/usr/share/awstats/lang"
+
+
+# Show menu header with reports' links
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowMenu=1
+
+
+# You choose here which reports you want to see in the main page and what you
+# want to see in those reports.
+# Possible values:
+#  0  - Report is not shown at all
+#  1  - Report is shown in main page with an entry in menu and default columns
+# XYZ - Report shows column informations defined by code X,Y,Z...
+#       X,Y,Z... are code letters among the following:
+#        U = Unique visitors
+#        V = Visits
+#        P = Number of pages
+#        H = Number of hits (or mails)
+#        B = Bandwidth (or total mail size for mail logs)
+#        L = Last access date
+#        E = Entry pages
+#        X = Exit pages
+#        C = Web compression (mod_gzip,mod_deflate)
+#        M = Average mail size (mail logs)
+#
+
+# Show monthly summary
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowSummary=UVPHB
+
+# Show monthly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: UVPHB, Possible column codes: UVPHB
+ShowMonthStats=UVPHB
+
+# Show days of month chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: VPHB, Possible column codes: VPHB
+ShowDaysOfMonthStats=VPHB
+
+# Show days of week chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowDaysOfWeekStats=PHB
+
+# Show hourly chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: PHB
+ShowHoursStats=PHB
+
+# Show domains/country chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHB, Possible column codes: UVPHB
+ShowDomainsStats=PHB
+
+# Show hosts chart
+# Context: Web, Streaming, Mail, Ftp
+# Default: PHBL, Possible column codes: PHBL
+ShowHostsStats=PHBL
+
+# Show authenticated users chart
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHBL
+ShowAuthenticatedUsers=0
+
+# Show robots chart
+# Context: Web, Streaming
+# Default: HBL, Possible column codes: HBL
+ShowRobotsStats=HBL
+
+# Show worms chart
+# Context: Web, Streaming
+# Default: 0 (If set to other than 0, see also LevelForWormsDetection), Possible column codes: HBL
+ShowWormsStats=0
+
+# Show email senders chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailSenders=0
+
+# Show email receivers chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: HBML
+ShowEMailReceivers=0
+
+# Show session chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowSessionsStats=1
+
+# Show pages-url chart.
+# Context: Web, Streaming, Ftp
+# Default: PBEX, Possible column codes: PBEX
+ShowPagesStats=PBEX
+
+# Show file types chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HBC
+ShowFileTypesStats=HB
+
+# Show file size chart (Not yet available)
+# Context: Web, Streaming, Mail, Ftp
+# Default: 1, Possible column codes: None
+ShowFileSizesStats=0
+
+# Show downloads chart.
+# Context: Web, Streaming, Ftp
+# Default: HB, Possible column codes: HB
+ShowDownloadsStats=HB
+
+# Show operating systems chart
+# Context: Web, Streaming, Ftp
+# Default: 1, Possible column codes: None
+ShowOSStats=1
+
+# Show browsers chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowBrowsersStats=1
+
+# Show screen size chart
+# Context: Web, Streaming
+# Default: 0 (If set to 1, see also MiscTrackerUrl), Possible column codes: None
+ShowScreenSizeStats=0
+
+# Show origin chart
+# Context: Web, Streaming
+# Default: PH, Possible column codes: PH
+ShowOriginStats=PH
+
+# Show keyphrases chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeyphrasesStats=1
+
+# Show keywords chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowKeywordsStats=1
+
+# Show misc chart
+# Context: Web, Streaming
+# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
+ShowMiscStats=a
+
+# Show http errors chart
+# Context: Web, Streaming
+# Default: 1, Possible column codes: None
+ShowHTTPErrorsStats=1
+
+# Show http error page details
+# Context: Web, Streaming
+# Default: R, Possible column codes: RH
+ShowHTTPErrorsPageDetail=R
+
+# Show smtp errors chart (For use when analyzing mail log files)
+# Context: Mail
+# Default: 0, Possible column codes: None
+ShowSMTPErrorsStats=0
+
+# Show the cluster report (Your LogFormat must contains the %cluster tag)
+# Context: Web, Streaming, Ftp
+# Default: 0, Possible column codes: PHB
+ShowClusterStats=0
+
+
+# Some graphical reports are followed by the data array of values.
+# If you don't want this array (to reduce the report size for example), you
+# can set thoose options to 0.
+# Possible values: 0 or 1
+# Default: 1
+#
+# Data array values for the ShowMonthStats report
+AddDataArrayMonthStats=1
+# Data array values for the ShowDaysOfMonthStats report
+AddDataArrayShowDaysOfMonthStats=1
+# Data array values for the ShowDaysOfWeekStats report
+AddDataArrayShowDaysOfWeekStats=1
+# Data array values for the ShowHoursStats report
+AddDataArrayShowHoursStats=1
+
+
+# In the Origin chart, you have stats on where your hits came from. You can
+# include hits on pages that come from pages of same sites in this chart.
+# Possible values: 0 or 1
+# Default: 0
+#
+IncludeInternalLinksInOriginSection=0
+
+
+# The following parameters can be used to choose the maximum number of lines
+# shown for the particular following reports.
+#
+# Stats by countries/domains
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+# Stats by hosts
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+# Stats by authenticated users
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+# Stats by robots
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+# Stats for Downloads
+MaxNbOfDownloadsShown = 10
+MinHitDownloads = 1
+# Stats by pages
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+# Stats by OS
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+# Stats by browsers
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+# Stats by screen size
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+# Stats by window size (following 2 parameters are not yet used)
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+# Stats by referers
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+# Stats for keyphrases
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+# Stats for keywords
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+# Stats for sender or receiver emails
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+
+
+# Choose if you want the week report to start on sunday or monday
+# Possible values:
+# 0 - Week starts on sunday
+# 1 - Week starts on monday
+# Default: 1
+#
+FirstDayOfWeek=1
+
+
+# List of visible flags that link to other language translations.
+# See Lang parameter for list of allowed flag/language codes.
+# If you don't want any flag link, set ShowFlagLinks to "".
+# This parameter is used only if ShowMenu parameter is set to 1.
+# Possible values: "" or "language_codes_separated_by_space"
+# Example: "en es fr nl de"
+# Default: ""
+#
+ShowFlagLinks=""
+
+
+# Each URL, shown in stats report views, are links you can click.
+# Possible values: 0 or 1
+# Default: 1
+#
+ShowLinksOnUrl=1
+
+
+# When AWStats builds HTML links in its report pages, it starts those links
+# with "http://". However some links might be HTTPS links, so you can enter
+# here the root of all your HTTPS links. If all your site is a SSL web site,
+# just enter "/".
+# This parameter is not used if ShowLinksOnUrl is 0.
+# Example: "/shopping"
+# Example: "/"
+# Default: ""
+#
+UseHTTPSLinkForUrl=""
+
+
+# Maximum length of URL part shown on stats page (number of characters).
+# This affects only URL visible text, links still work.
+# Default: 64
+#
+MaxLengthOfShownURL=64
+
+
+# You can enter HTML code that will be added at the top of AWStats reports.
+# Default: ""
+#
+HTMLHeadSection=""
+
+
+# You can enter HTML code that will be added at the end of AWStats reports.
+# Great to add advert ban.
+# Default: ""
+#
+HTMLEndSection=""
+
+
+# By default AWStats page contains meta tag robots=noindex,nofollow
+# If you want to have your statistics to be indexed, set this option to 1.
+# Default: 0
+#
+MetaRobot=0
+
+
+# You can set Logo and LogoLink to use your own logo.
+# Logo must be the name of image file (must be in $DirIcons/other directory).
+# LogoLink is the expected URL when clicking on Logo.
+# Default: "awstats_logo6.png"
+#
+Logo="awstats_logo6.png"
+LogoLink="http://www.awstats.org"
+
+
+# Value of maximum bar width/height for horizontal/vertical HTML graphics bars.
+# Default: 260/90
+#
+BarWidth   = 260
+BarHeight  = 90
+
+
+# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
+# change its look. To create a style sheet, you can use samples provided with
+# AWStats in wwwroot/css directory.
+# Example: "/awstatscss/awstats_bw.css"
+# Example: "/css/awstats_bw.css"
+# Default: ""
+#
+StyleSheet=""
+
+
+# Those color parameters can be used (if StyleSheet parameter is not used)
+# to change AWStats look.
+# Example: color_name="RRGGBB"	# RRGGBB is Red Green Blue components in Hex
+#
+color_Background="FFFFFF"		# Background color for main page (Default = "FFFFFF")
+color_TableBGTitle="CCCCDD"		# Background color for table title (Default = "CCCCDD")
+color_TableTitle="000000"		# Table title font color (Default = "000000")
+color_TableBG="CCCCDD"			# Background color for table (Default = "CCCCDD")
+color_TableRowTitle="FFFFFF"	# Table row title font color (Default = "FFFFFF")
+color_TableBGRowTitle="ECECEC"	# Background color for row title (Default = "ECECEC")
+color_TableBorder="ECECEC"		# Table border color (Default = "ECECEC")
+color_text="000000"				# Color of text (Default = "000000")
+color_textpercent="606060"		# Color of text for percent values (Default = "606060")
+color_titletext="000000"		# Color of text title within colored Title Rows (Default = "000000")
+color_weekend="EAEAEA"			# Color for week-end days (Default = "EAEAEA")
+color_link="0011BB"				# Color of HTML links (Default = "0011BB")
+color_hover="605040"			# Color of HTML on-mouseover links (Default = "605040")
+color_u="FFAA66"				# Background color for number of unique visitors (Default = "FFAA66")
+color_v="F4F090"				# Background color for number of visites (Default = "F4F090")
+color_p="4477DD"				# Background color for number of pages (Default = "4477DD")
+color_h="66DDEE"				# Background color for number of hits (Default = "66DDEE")
+color_k="2EA495"				# Background color for number of bytes (Default = "2EA495")
+color_s="8888DD"				# Background color for number of search (Default = "8888DD")
+color_e="CEC2E8"				# Background color for number of entry pages (Default = "CEC2E8")
+color_x="C1B2E2"				# Background color for number of exit pages (Default = "C1B2E2")
+
+
+
+#-----------------------------------------------------------------------------
+# PLUGINS
+#-----------------------------------------------------------------------------
+
+# Add here all plugin files you want to load.
+# Plugin files must be .pm files stored in 'plugins' directory.
+# Uncomment LoadPlugin lines to enable a plugin after checking that perl
+# modules required by the plugin are installed.
+
+# PLUGIN: Tooltips
+# REQUIRED MODULES: None
+# PARAMETERS: None
+# DESCRIPTION: Add tooltips pop-up help boxes to HTML report pages.
+# NOTE: This will increased HTML report pages size, thus server load and bandwidth.
+#
+#LoadPlugin="tooltips"
+
+# PLUGIN: DecodeUTFKeys
+# REQUIRED MODULES: Encode and URI::Escape
+# PARAMETERS: None
+# DESCRIPTION: Allow AWStats to show correctly (in language charset)
+# keywords/keyphrases strings even if they were UTF8 coded by the
+# referer search engine.
+#
+#LoadPlugin="decodeutfkeys"
+
+# PLUGIN: IPv6
+# PARAMETERS: None
+# REQUIRED MODULES: Net::IP and Net::DNS
+# DESCRIPTION: This plugin gives AWStats capability to make reverse DNS
+# lookup on IPv6 addresses.
+#
+#LoadPlugin="ipv6"
+
+# PLUGIN: HashFiles
+# REQUIRED MODULES: Storable
+# PARAMETERS: None
+# DESCRIPTION: AWStats DNS cache files are read/saved as native hash files.
+# This increases DNS cache files loading speed, above all for very large web sites.
+#
+LoadPlugin="hashfiles"
+
+
+# PLUGIN: UserInfo
+# REQUIRED MODULES: None
+# PARAMETERS: None
+# DESCRIPTION: Add a text (Firtname, Lastname, Office Department, ...) in
+# authenticated user reports for each login value.
+# A text file called userinfo.myconfig.txt, with two fields (first is login,
+# second is text to show, separated by a tab char) must be created in DirData
+# directory.
+#
+#LoadPlugin="userinfo"
+
+# PLUGIN: HostInfo
+# REQUIRED MODULES: Net::XWhois
+# PARAMETERS: None
+# DESCRIPTION: Add a column into host chart with a link to open a popup window that shows
+# info on host (like whois records).
+#
+#LoadPlugin="hostinfo"
+
+# PLUGIN: ClusterInfo
+# REQUIRED MODULES: None
+# PARAMETERS: None
+# DESCRIPTION: Add a text (for example a full hostname) in cluster reports for each cluster
+# number. A text file called clusterinfo.myconfig.txt, with two fields (first is
+# cluster number, second is text to show) separated by a tab char. must be
+# created into DirData directory.
+# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
+# use a personalized log format that contains %cluster tag.
+#
+#LoadPlugin="clusterinfo"
+
+# PLUGIN: UrlAliases
+# REQUIRED MODULES: None
+# PARAMETERS: None
+# DESCRIPTION: Add a text (Page title, description...) in URL reports before URL value.
+# A text file called urlalias.myconfig.txt, with two fields (first is URL,
+# second is text to show, separated by a tab char) must be created into
+# DirData directory.
+#
+#LoadPlugin="urlalias"
+
+# PLUGIN: TimeHiRes
+# REQUIRED MODULES: Time::HiRes (if Perl < 5.8)
+# PARAMETERS: None
+# DESCRIPTION: Time reported by -showsteps option is in millisecond. For debug purpose.
+#
+#LoadPlugin="timehires"
+
+# PLUGIN: TimeZone
+# REQUIRED MODULES: Time::Local
+# PARAMETERS: [timezone offset]
+# DESCRIPTION: Allow AWStats to adjust time stamps for a different timezone
+# This plugin reduces AWStats speed of 10% !!!!!!!
+# LoadPlugin="timezone"
+# LoadPlugin="timezone +2"
+# LoadPlugin="timezone CET"
+#
+#LoadPlugin="timezone +2"
+
+# PLUGIN: Rawlog
+# REQUIRED MODULES: None
+# PARAMETERS: None
+# DESCRIPTION: This plugin adds a form in AWStats main page to allow users to see raw
+# content of current log files. A filter is also available.
+#
+#LoadPlugin="rawlog"
+
+# PLUGIN: GraphApplet
+# REQUIRED MODULES: None
+# PARAMETERS: [CSS classes to override]
+# DESCRIPTION: Supported charts are built by a 3D graphic applet.
+#
+#LoadPlugin="graphapplet /awstatsclasses"				# EXPERIMENTAL FEATURE
+
+# PLUGIN: GraphGoogleChartAPI
+# REQUIRED MODULES: None
+# PARAMETERS: None
+# DESCRIPTION: Replaces the standard charts with free Google API generated images
+# in HTML reports. If country data is available and more than one country has hits,
+# a map will be generated using Google Visualizations.
+# Note: The machine where reports are displayed must have Internet access for the
+# charts to be generated. The only data sent to Google includes the statistic numbers,
+# legend names and country names.
+# Warning: This plugin is not compatible with option BuildReportFormat=xhtml.
+#
+#LoadPlugin="graphgooglechartapi"
+
+# PLUGIN: GeoIPfree
+# REQUIRED MODULES: Geo::IPfree version 0.2+ (from Graciliano M.P.)
+# PARAMETERS: None
+# DESCRIPTION: Country chart is built from an Internet IP-Country database.
+# This plugin is useless for intranet only log files.
+# Note: You must choose between using this plugin (need Perl Geo::IPfree
+# module, database is free but not up to date) or the GeoIP plugin (need
+# Perl Geo::IP module from Maxmind, database is also free and up to date).
+# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
+# module, so install it from elsewhere (from www.cpan.org for example).
+# This plugin reduces AWStats speed by up to 10% !
+#
+#LoadPlugin="geoipfree"
+
+# MAXMIND GEO IP MODULES: Please see documentation for notes on all Maxmind modules
+
+# PLUGIN: GeoIP
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/geoip.dat[+/pathto/override.txt]]
+# DESCRIPTION: Builds a country chart and adds an entry to the hosts
+# table with country name
+# Replace spaces in the path of geoip data file with string "%20".
+#
+#LoadPlugin="geoip GEOIP_STANDARD /usr/share/GeoIP/GeoIP.dat"
+
+# PLUGIN: GeoIP6
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind, version >= 1.40)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/geoipv6.dat[+/pathto/override.txt]]
+# DESCRIPTION: Builds a country chart and adds an entry to the hosts
+# table with country name
+# works with IPv4 and also IPv6 addresses
+# Replace spaces in the path of geoip data file with string "%20".
+#
+#LoadPlugin="geoip6 GEOIP_STANDARD /pathto/GeoIPv6.dat"
+
+# PLUGIN: GeoIP_City_Maxmind
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPCity.dat[+/pathto/override.txt]]
+# DESCRIPTION: This plugin adds a column under the hosts field and tracks the pageviews
+# and hits by city including regions.
+# Replace spaces in the path of geoip data file with string "%20".
+#
+#LoadPlugin="geoip_city_maxmind GEOIP_STANDARD /usr/share/GeoIP/GeoIPCity.dat"
+
+# PLUGIN: GeoIP_ASN_Maxmind
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPASN.dat[+/pathto/override.txt][+http://linktoASlookup]]
+# DESCRIPTION: This plugin adds a chart of AS numbers where the host IP address is registered.
+# This plugin can display some ISP information if included in the database. You can also provide
+# a link that will be used to lookup additional registration data. Put the link at the end of
+# the parameter string and the report page will include the link with the full AS number at the end.
+# Replace spaces in the path of geoip data file with string "%20".
+#
+#LoadPlugin="geoip_asn_maxmind GEOIP_STANDARD /usr/local/geoip.dat+http://enc.com.au/itools/autnum.php?asn="
+
+# PLUGIN: GeoIP_Region_Maxmind
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPRegion.dat[+/pathto/override.txt]]
+# DESCRIPTION:This plugin adds a chart of hits by regions. Only regions for US and
+# Canada can be detected.
+# Replace spaces in the path of geoip data file with string "%20".
+#
+#LoadPlugin="geoip_region_maxmind GEOIP_STANDARD /usr/share/GeoIP/GeoIPRegion.dat"
+
+# PLUGIN: GeoIP_ISP_Maxmind
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPISP.dat[+/pathto/override.txt]]
+# DESCRIPTION: This plugin adds a chart of hits by ISP.
+# Replace spaces in the path of geoip data file with string "%20".
+#
+#LoadPlugin="geoip_isp_maxmind GEOIP_STANDARD /usr/share/GeoIP/GeoIPISP.dat"
+
+# PLUGIN: GeoIP_Org_Maxmind
+# REQUIRED MODULES: Geo::IP or Geo::IP::PurePerl (from Maxmind)
+# PARAMETERS: [GEOIP_STANDARD | GEOIP_MEMORY_CACHE] [/pathto/GeoIPOrg.dat[+/pathto/override.txt]]
+# DESCRIPTION: This plugin add a chart of hits by Organization name
+# Replace spaces in the path of geoip data file with string "%20".
+#
+#LoadPlugin="geoip_org_maxmind GEOIP_STANDARD /usr/share/GeoIP/GeoIPOrg.dat"
+
+
+#-----------------------------------------------------------------------------
+# EXTRA SECTIONS
+#-----------------------------------------------------------------------------
+
+# You can define your own charts, you choose here what are rows and columns
+# keys. This feature is particularly useful for marketing purpose, tracking
+# products orders for example.
+# For this, edit all parameters of Extra section. Each set of parameter is a
+# different chart. For several charts, duplicate section changing the number.
+# Note: Each Extra section reduces AWStats speed by 8%.
+#
+# WARNING: A wrong setup of Extra section might result in too large arrays
+# that will consume all your memory, making AWStats unusable after several
+# updates, so be sure to setup it correctly.
+# In most cases, you don't need this feature.
+#
+# ExtraSectionNameX is title of your personalized chart.
+# ExtraSectionCodeFilterX is list of codes the record code field must match.
+#   Put an empty string for no test on code.
+# ExtraSectionConditionX are conditions you can use to count or not the hit,
+#   Use one of the field condition
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOSTINLOG,HOST,VHOST,extraX)
+#   and a regex to match, after a coma. Use "||" for "OR".
+# ExtraSectionFirstColumnTitleX is the first column title of the chart.
+# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
+#   extract value from
+#   (URL,URLWITHQUERY,QUERY_STRING,REFERER,UA,HOSTINLOG,HOST,VHOST,extraX)
+#   and how to extract the value (using regex syntax). Each different value
+#   found will appear in first column of report on a different row. Be sure
+#   that list of different possible values will not grow indefinitely.
+# ExtraSectionFirstColumnFormatX is the string used to write value.
+# ExtraSectionStatTypesX are things you want to count. You can use standard
+#   code letters (P for pages,H for hits,B for bandwidth,L for last access).
+# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
+# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
+# MaxNbOfExtraX is maximum number of rows shown in chart.
+# MinHitExtraX is minimum number of hits required to be shown in chart.
+#
+
+# Example to report the 20 products the most ordered by "order.cgi" script
+#ExtraSectionName1="Product orders"
+#ExtraSectionCodeFilter1="200 304"
+#ExtraSectionCondition1="URL,\/cgi\-bin\/order\.cgi||URL,\/cgi\-bin\/order2\.cgi"
+#ExtraSectionFirstColumnTitle1="Product ID"
+#ExtraSectionFirstColumnValues1="QUERY_STRING,productid=([^&]+)"
+#ExtraSectionFirstColumnFormat1="%s"
+#ExtraSectionStatTypes1=PL
+#ExtraSectionAddAverageRow1=0
+#ExtraSectionAddSumRow1=1
+#MaxNbOfExtra1=20
+#MinHitExtra1=1
+
+
+# There is also a global parameter ExtraTrackedRowsLimit that limits the
+# number of possible rows an ExtraSection can report. This parameter is
+# here to protect too much memory use when you make a bad setup in your
+# ExtraSection. It applies to all ExtraSection independently meaning that
+# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
+# If you know an ExtraSection will report more rows than its value, you should
+# increase this parameter or AWStats will stop with an error.
+# Example: 2000
+# Default: 500
+#
+ExtraTrackedRowsLimit=500
+
+
+#-----------------------------------------------------------------------------
+# INCLUDES
+#-----------------------------------------------------------------------------
+
+# You can include other config files using the directive with the name of the
+# config file.
+# This is particularly useful for users who have a lot of virtual servers, so
+# a lot of config files and want to maintain common values in only one file.
+# Note that when a variable is defined both in a config file and in an
+# included file, AWStats will use the last value read for parameters that
+# contains one value and AWStats will concat all values from both files for
+# parameters that are lists of values.
+#
+
diff --git a/crontab b/crontab
new file mode 100644
index 0000000..f70c7f1
--- /dev/null
+++ b/crontab
@@ -0,0 +1,4 @@
+
+29 4 * * *	root	/srv/www/spragg-ssl.co.uk/daily.sh
+
+16 * * * *	root	/srv/www/spragg-ssl.co.uk/hourly.sh
diff --git a/daily.sh b/daily.sh
new file mode 100755
index 0000000..2d15006
--- /dev/null
+++ b/daily.sh
@@ -0,0 +1,30 @@
+#! /bin/sh
+
+DOMAIN="spragg-ssl.co.uk"
+SITEROOT="/srv/www/$DOMAIN"
+
+DATE=`/bin/date +%Y-%m-%d`
+LOGFILE="$SITEROOT/log/updates.$DATE.log"
+TSFMT="%b %d %H:%M:%S"
+
+AWYEAR=`/bin/date -d yesterday +%Y`
+AWMON=`/bin/date -d yesterday +%m`
+
+
+# Delete any logs older than 30 days
+/usr/bin/find "$SITEROOT/log" -name "*.log" -mtime +30 -delete 2>&1 | /usr/bin/ts "$TSFMT find:" >>$LOGFILE
+
+# Run awstats
+$SITEROOT/awstats/awstats -config="$DOMAIN" -update 2>&1 | /usr/bin/ts "$TSFMT awstats:" >>$LOGFILE
+
+# Remove any PII (e.g. IP addresses) from the awstats data
+#AWDATA="$SITEROOT/awstats/data/awstats${AWMON}${AWYEAR}.txt"
+#/bin/grep -E -v "^[[:digit:]]{1,3}\\.[[:digit:]]{1,3}\\.[[:digit:]]{1,3}\\.[[:digit:]]{1,3} [[:digit:]]" "$AWDATA" | /usr/bin/sponge "$AWDATA"
+
+#$SITEROOT/awstats/awstats_buildstaticpages.pl \
+/usr/share/awstats/tools/awstats_buildstaticpages.pl \
+	-awstatsprog="$SITEROOT/awstats/awstats" \
+	-config="$DOMAIN" -dir="$SITEROOT/awstats/html" \
+	-year="$AWYEAR" -month="$AWMONTH" \
+	2>&1 | /usr/bin/ts "$TSFMT awstats_buildstaticpages.pl:" >>$LOGFILE
+
diff --git a/hourly.sh b/hourly.sh
new file mode 100755
index 0000000..c865435
--- /dev/null
+++ b/hourly.sh
@@ -0,0 +1,12 @@
+#! /bin/sh
+
+DOMAIN="spragg-ssl.co.uk"
+SITEROOT="/srv/www/$DOMAIN"
+
+DATE=`/bin/date +%Y-%m-%d`
+LOGFILE="$SITEROOT/log/updates.$DATE.log"
+TSFMT="%b %d %H:%M:%S"
+
+
+# Update rawdog
+/usr/bin/rawdog --dir "$SITEROOT/rawdog" --update --write 2>&1 | /usr/bin/ts "$TSFMT rawdog:" >>$LOGFILE
diff --git a/html/.gitignore b/html/.gitignore
new file mode 100644
index 0000000..34e3a08
--- /dev/null
+++ b/html/.gitignore
@@ -0,0 +1 @@
+blog
diff --git a/html/contact b/html/contact
new file mode 100644
index 0000000..61ccceb
--- /dev/null
+++ b/html/contact
@@ -0,0 +1,35 @@
+<!DOCTYPE html>
+<html>
+	<head>
+		<title>Contact - Spragg Software Services Ltd.</title>
+		<link rel="stylesheet" href="/style/main.css"></link>
+	</head>
+	<body>
+		<header>
+			<h1>Contact</h1>
+			<nav>
+				<ul>
+					<li><a href="/">Home</a></li>
+					<li><a href="/projects">Projects</a></li>
+					<li><a href="/blog">Blog</a></li>
+					<li><a href="/privacy">Privacy</a></li>
+					<li class="selected"><a href="/contact">Contact</a></li>
+				</ul>
+			</nav>
+		</header>
+		<main>
+			<h2>Contact</h2>
+			<p>The best way to get in contact with me is by email, at
+				<a href="mailto:adam@spragg-ssl.co.uk">adam@spragg-ssl.co.uk</a>.</p>
+			<p>I'm based in
+				<a href="https://www.openstreetmap.org/#map=11/53.3811/-1.4722">Sheffield, UK</a> if
+				that's an issue, but most of what I do can be done remotely.</p>
+		</main>
+		<footer>
+			<hr />
+			<p>Spragg Software Services Ltd is registered in England, No. 11248242.
+				Registered office: 82 Upper Hanover Street, Sheffield, S3 7RQ.
+				VAT reg No. 295343283.</p>
+		</footer>
+	</body>
+</html>
diff --git a/html/index.php b/html/index.php
new file mode 100644
index 0000000..18ff7df
--- /dev/null
+++ b/html/index.php
@@ -0,0 +1,61 @@
+<!DOCTYPE html>
+<html>
+	<head>
+		<title>Spragg Software Services Ltd.</title>
+		<link rel="stylesheet" href="/style/main.css"></link>
+	</head>
+	<body>
+		<header>
+			<h1>Spragg Software Services Ltd</h1>
+			<nav>
+				<ul>
+					<li class="selected"><a href="/">Home</a></li>
+					<li><a href="/projects">Projects</a></li>
+					<li><a href="/blog">Blog</a></li>
+					<li><a href="/privacy">Privacy</a></li>
+					<li><a href="/contact">Contact</a></li>
+				</ul>
+			</nav>
+		</header>
+		<main>
+			<h2>Software customisation</h2>
+			<p>Sometimes a software package does 99% of the things you need it to do, but if it just did
+				<em>one</em> thing slightly differently, it would save you a lot of time, or make you
+				a lot more productive.
+				Some software, especially (but not only)
+				<a href="https://www.gnu.org/philosophy/free-sw.html">Free Software</a>, is made with
+				customisability, or even just extensibility, in mind.
+				It's possible that your software could be customised to fit your needs better.</p>
+
+			<h2>Software configuration</h2>
+			<p>Sometimes software <em>can</em> can do the thing you need it to do, but <em>making</em> it
+				do that thing can be poorly documented or even just spectacularly non-obvious.</p>
+
+			<h2><!-- img src="/icons/Tango/scalable/apps/system-installer.svg" /-->Software installation</h2>
+			<p>Sometimes, just getting software installed correctly can be a battle.
+				In those cases, just figuring out what the issue is can be a struggle.</p>
+
+			<h2>Custom automation</h2>
+			<p>Sometimes you've got two software packages that do exactly what they're supposed to do,
+				but they don't talk to each other.
+				Maybe that manual procedure you have to repeat again and again to get data from one
+				place to another could be automated.</p>
+
+			<h2>Tech troubleshooting</h2>
+			<p>Sometimes tech just plays up, doesn't do what it's supposed to, or stops doing what it used
+				to do for no apparent reason.</p>
+		       
+			<h2>Who you gonna... uh, email?</h2>
+			<p><a href="mailto:adam@spragg-ssl.co.uk">Drop me a line</a>, and I'll let you know if I think I
+				can help.
+				My expertise is mostly with Linux- and other Free-Software-based systems, but I might be
+				able to lend a hand with other platforms too.</p>
+		</main>
+		<footer>
+			<hr />
+			<p>Spragg Software Services Ltd is registered in England, No. 11248242.
+				Registered office: 82 Upper Hanover Street, Sheffield, S3 7RQ.
+				VAT reg No. 295343283.</p>
+		</footer>
+	</body>
+</html>
diff --git a/html/obs/awstats b/html/obs/awstats
new file mode 120000
index 0000000..f260b94
--- /dev/null
+++ b/html/obs/awstats
@@ -0,0 +1 @@
+../../awstats/html
\ No newline at end of file
diff --git a/html/obs/awstats-icon b/html/obs/awstats-icon
new file mode 120000
index 0000000..d8016e7
--- /dev/null
+++ b/html/obs/awstats-icon
@@ -0,0 +1 @@
+/usr/share/awstats/icon
\ No newline at end of file
diff --git a/html/privacy b/html/privacy
new file mode 100644
index 0000000..f0fa28d
--- /dev/null
+++ b/html/privacy
@@ -0,0 +1,74 @@
+<!DOCTYPE html>
+<html>
+	<head>
+		<title>Privacy - Spragg Software Services Ltd.</title>
+		<link rel="stylesheet" href="/style/main.css"></link>
+	</head>
+	<body>
+		<header>
+			<h1>Privacy</h1>
+			<nav>
+				<ul>
+					<li><a href="/">Home</a></li>
+					<li><a href="/projects">Projects</a></li>
+					<li><a href="/blog">Blog</a></li>
+					<li class="selected"><a href="/privacy">Privacy</a></li>
+					<li><a href="/contact">Contact</a></li>
+				</ul>
+			</nav>
+		</header>
+		<main>
+			<h2>Cookies</h2>
+			<p>This website does not use any 3rd party analytics or advertising.
+				Also, no cookies are created or used by the static pages as you browse the main site.
+				Some parts of the website may be dynamic and need to treat your page requests together
+				as part of a single browsing session, or to keep track of choices you have made.
+				In these cases, the use of cookies falls under the "exception to the requirement to
+				provide information about cookies and obtain consent [... where ...] such storage or
+				access is strictly necessary for the provision of an information society service
+				requested by the subscriber or user." of the EC Directive on Privacy and Electronic
+				Communications.
+				See the
+				<a href="https://ico.org.uk/media/for-organisations/documents/1545/cookies_guidance.pdf">ICO Guidance</a>
+				on the subject for more information.</p>
+
+			<h2>Requested information</h2>
+			<p>At times, this website may host various applications, which may request information from you.
+				The information requested should either be optional, or be necessary for the operation
+				of the specific application.
+				In each case, the individual application should link to its own privacy policy,
+				explaining what information is being requested, and how it will be used.</p>
+
+			<h2>Logs</h2>
+			<p>The website saves logs of page requests, including the IP address of the computer which made
+				each request, and any
+				<a href="https://en.wikipedia.org/wiki/Query_string">query string</a> parameters that
+				might have been part of the URL requested.
+				These logs are saved for monitoring and troubleshooting purposes, and are deleted after
+				30 days.
+				The logs may be processed and analyzed for analytics purposes, with the processed
+				results stored for longer, but any potentially personal information (such as IP address
+				or query string parameters) is stripped from these results.</p>
+
+			<h2>Data locality</h2>
+			<p>All data collected on this site is stored and processed exclusively in the UK.
+				However, data that is made publically available from this site over the internet may be
+				accessed from anywhere in the world.
+				You should be aware that sending information over the internet from one computer in the
+				UK to another computer in the UK, may be routed outside of the UK in transit, as a
+				fundamental consequence of how internet routing works.
+				However, this site endeavours to use end-to-end encryption wherever possible, to ensure
+				the privacy of any data sent over the internet.</p>
+
+			<h2>Further information</h2>
+			<p>For further information, email
+				<a href="mailto:webmaster@spragg-ssl.co.uk">webmaster@spragg-ssl.co.uk</a>.</p>
+		</main>
+		<footer>
+			<hr />
+			<p>Spragg Software Services Ltd is registered in England, No. 11248242.
+				Registered office: 82 Upper Hanover Street, Sheffield, S3 7RQ.
+				VAT reg No. 295343283.</p>
+		</footer>
+	</body>
+</html>
diff --git a/html/projects/index.html b/html/projects/index.html
new file mode 100644
index 0000000..d89f991
--- /dev/null
+++ b/html/projects/index.html
@@ -0,0 +1,30 @@
+<!DOCTYPE html>
+<html>
+	<head>
+		<title>Spragg Software Services Ltd.</title>
+		<link rel="stylesheet" href="/style/main.css"></link>
+	</head>
+	<body>
+		<header>
+			<h1>Spragg Software Services Ltd - Projects</h1>
+			<nav>
+				<ul>
+					<li><a href="/">Home</a></li>
+					<li class="selected"><a href="/projects">Projects</a></li>
+					<li><a href="/blog">Blog</a></li>
+					<li><a href="/privacy">Privacy</a></li>
+					<li><a href="/contact">Contact</a></li>
+				</ul>
+			</nav>
+		</header>
+		<main>
+			<p>To be continued...</p>
+		</main>
+		<footer>
+			<hr />
+			<p>Spragg Software Services Ltd is registered in England, No. 11248242.
+				Registered office: 82 Upper Hanover Street, Sheffield, S3 7RQ.
+				VAT reg No. 295343283.</p>
+		</footer>
+	</body>
+</html>
diff --git a/html/style/grid.png b/html/style/grid.png
new file mode 100644
index 0000000..3ac5a3e
--- /dev/null
+++ b/html/style/grid.png
diff --git a/html/style/main.css b/html/style/main.css
new file mode 100644
index 0000000..d94e0a7
--- /dev/null
+++ b/html/style/main.css
@@ -0,0 +1,97 @@
+html {
+	background-color: #f0fff0;
+	background-image: url('/style/grid.png');
+	font-family: sans-serif;
+	color: #404040;
+}
+
+body {
+	margin: 0;
+}
+
+a,
+a:hover,
+a:visited {
+	color: inherit;
+}
+
+/* * * Header * * */
+body > header {
+	padding-top: 1px; /* Don't allow child element top margins to extend out of the header element */
+	background-color: #000000;
+	background-image: url('/style/grid.png');
+	color: #00c000;
+}
+
+h1 {
+	font-family: monospace;
+	/*font-variant: small-caps;*/
+	text-align: center;
+	text-shadow: 0 0 0.2em #00c000;
+}
+
+nav {
+	background-color: #00c000;
+	color: #000000;
+}
+
+nav ul {
+	max-width: 80em;
+	margin: 0 auto 0;
+}
+
+nav ul li {
+	display: inline-block;
+	padding: 0.2em 1em;
+	border-right: 1px #000000 solid;
+}
+
+nav ul li:first-child {
+	border-left: 1px #000000 solid;
+}
+
+nav ul li.selected {
+	color: #ffffff;
+}
+
+nav a,
+nav a:visited {
+	text-decoration: none;
+}
+
+nav a:hover {
+	text-decoration: underline;
+}
+
+
+/* * * Main * * */
+
+main {
+	max-width: 80em;
+	margin: 0 auto 0;
+	padding: 2em;
+	background-color: #ffffff;
+}
+
+h2 {
+	margin-bottom: 0;
+}
+
+p {
+	margin-top: 0.5em;
+}
+
+/* * * Footer * * */
+
+footer {
+	max-width: 80em;
+	margin: 0 auto 0;
+	padding: 2em;
+	background-color: #ffffff;
+}
+
+footer p {
+	font-size: 70%;
+	text-align: center;
+}
+
diff --git a/rawdog/.gitignore b/rawdog/.gitignore
new file mode 100644
index 0000000..29d2dd0
--- /dev/null
+++ b/rawdog/.gitignore
@@ -0,0 +1,2 @@
+state
+state.lock
diff --git a/rawdog/config b/rawdog/config
new file mode 100644
index 0000000..2472c6d
--- /dev/null
+++ b/rawdog/config
@@ -0,0 +1,285 @@
+# Sample rawdog config file. Copy this into your ~/.rawdog/ directory, and edit
+# it to suit your preferences.
+# All paths in this file should be either absolute, or relative to your .rawdog
+# directory.
+# If you want to include another config file, then use "include FILENAME".
+
+# Times in this file are specified as a value and a unit (for instance,
+# "4h").  Units available are "s" (seconds), "m" (minutes), "h" (hours),
+# "d" (days) and "w" (weeks). If no unit is specified, rawdog will
+# assume minutes.
+# Boolean (yes/no) values in this file are specified as "true" or "false".
+
+# rawdog can be extended using plugin modules written in Python. This
+# option specifies the directories to search for plugins to load. If a
+# directory does not exist or cannot be read, it will be ignored.  This
+# option must appear before any options that are implemented by plugins.
+plugindirs plugins
+
+# Whether to split rawdog's state amongst multiple files.
+# If this is turned on, rawdog will use significantly less memory, but
+# will do more disk IO -- probably a good idea if you read a lot of
+# feeds.
+splitstate false
+
+# The maximum number of articles to show on the generated page.
+# Set this to 0 for no limit.
+maxarticles 200
+
+# The maximum age of articles to show on the generated page.
+# Set this to 0 for no limit.
+maxage 0
+
+# The age after which articles will be discarded if they do not appear
+# in a feed. Set this to a larger value if you want your rawdog output
+# to cover more than a day's worth of articles.
+expireage 1d
+
+# The minimum number of articles from each feed to keep around in the history.
+# Set this to 0 to only keep articles that were returned the last time the feed
+# was fetched. (If this is set to 0, or "currentonly" below is set to true,
+# then rawdog will not send the RFC3229+feed "A-IM: feed" header when making
+# HTTP requests, since it can't tell from the response to such a request
+# whether any articles have been removed from the feed; this makes rawdog
+# slightly less bandwidth-efficient.)
+keepmin 20
+
+# Whether to only display articles that are currently included in a feed
+# (useful for "planet" pages where you only want to display the current
+# articles from several feeds). If this is false, rawdog will keep a
+# history of older articles.
+currentonly false
+
+# Whether to divide the articles up by day, writing a "dayformat" heading
+# before each set.
+daysections true
+
+# The format to write day headings in. See "man strftime" for more
+# information; for example:
+# %A, %d %B           Wednesday, 21 January
+# %Y-%m-%d            2004-01-21 (ISO 8601 format)
+dayformat %A, %d %B
+
+# Whether to divide the articles up by time, writing a "timeformat" heading
+# before each set.
+timesections true
+
+# The format to write time headings in. For example:
+# %H:%M               18:07 (ISO 8601 format)
+# %I:%M %p            06:07 PM
+timeformat %H:%M
+
+# The format to display feed update and article times in. For example:
+# %H:%M, %A, %d %B    18:07, Wednesday, 21 January
+# %Y-%m-%d %H:%M      2004-01-21 18:07 (ISO 8601 format)
+datetimeformat %H:%M, %A, %d %B
+
+# The page template file to use, or "default" to use the built-in template
+# (which is probably sufficient for most users). Use "rawdog -s page" to show
+# the template currently in use as a starting-point for customisation.
+# The following strings will be replaced in the output:
+# __version__         The rawdog version in use
+# __refresh__         The HTML 4 <meta http-equiv="refresh" ...> header
+# __items__           The aggregated items
+# __num_items__       The number of items on the page
+# __feeds__           The feed list
+# __num_feeds__       The number of feeds listed
+# You can define additional strings using "define" in this config file; for
+# example, if you say "define myname Adam Sampson", then "__myname__" will be
+# replaced by "Adam Sampson" in the output.
+#pagetemplate default
+pagetemplate page.template
+
+# Similarly, the template used for each item shown. Use "rawdog -s item" to
+# show the template currently in use as a starting-point for customisation.
+# The following strings will be replaced in the output:
+# __title__           The item title (as an HTML link, if possible)
+# __title_no_link__   The item title (as text)
+# __url__             The item's URL, or the empty string if it doesn't
+#                     have one
+# __guid__            The item's GUID, or the empty string if it doesn't
+#                     have one
+# __description__     The item's descriptive text, or the empty string
+#                     if it doesn't have a description
+# __date__            The item's date as provided by the feed
+# __added__           The date the article was received by rawdog
+# __hash__            A hash of the article (useful for summary pages)
+#
+# All of the __feed_X__ strings from feeditemtemplate below will also be
+# expanded here, for the feed that the article came from.
+#
+# You can define additional strings on a per-feed basis by using the
+# "define_X" feed option; see the description of "feed" below for more
+# details.
+#
+# Simple conditional expansion is possible by saying something like
+# "__if_items__ hello __endif__"; the text between the if and endif will
+# only be included if __items__ would expand to something other than
+# the empty string. Ifs can be nested, and __else__ is supported.
+# (This also works for the other templates, but it's most useful here.)
+#itemtemplate default
+itemtemplate item.template
+
+# The template used to generate the feed list (__feeds__ above). Use "rawdog
+# -s feedlist" to show the current template.
+# The following strings will be replaced in the output:
+# __feeditems__       The feed items
+feedlisttemplate default
+
+# The template used to generate each item in the feed list. Use "rawdog
+# -s feeditem" to show the current template.
+# The following strings will be replaced in the output:
+# __feed_id__         The feed's title with non-alphanumeric characters
+#                     (and HTML markup) removed (useful for per-feed
+#                     styles); you can use the "id" feed option below to
+#                     set a custom ID if you prefer
+# __feed_hash__       A hash of the feed URL (useful for per-feed styles)
+# __feed_title__      The feed title (as an HTML link, if possible)
+# __feed_title_no_link__
+#                     The feed title (as text)
+# __feed_url__        The feed URL
+# __feed_icon__       An "XML button" linking to the feed URL
+# __feed_last_update__
+#                     The time when the feed was last updated
+# __feed_next_update__
+#                     The time when the feed will next need updating
+feeditemtemplate default
+
+# Where to write the output HTML to. You should place style.css in the same
+# directory. Specify this as "-" to write the HTML to stdout.
+# (You will probably want to make this an absolute path, else rawdog will write
+# to a file in your ~/.rawdog directory.)
+outputfile /srv/www/spragg-ssl.co.uk/html/blog
+#outputfile /home/you/public_html/rawdog.html
+
+# Whether to use a <meta http-equiv="Refresh" ...> tag in the generated
+# HTML to indicate that the page should be refreshed automatically. If
+# this is turned on, then the page will refresh every N minutes, where N
+# is the shortest feed period value specified below.
+# (This works by controlling whether the default template includes
+# __refresh__; if you use a custom template, __refresh__ is always
+# available.)
+userefresh true
+
+# Whether to show the list of active feeds in the generated HTML.
+# (This works by controlling whether the default template includes
+# __feeds__; if you use a custom template, __feeds__ is always
+# available.)
+showfeeds true
+
+# The number of concurrent threads that rawdog will use when fetching
+# feeds -- i.e. the number of feeds that rawdog will attempt to fetch at
+# the same time.  If you have a lot of feeds, setting this to be 20 or
+# so will significantly speed up updates. If this is set to 1 (or
+# fewer), rawdog will not start any additional threads at all.
+numthreads 1
+
+# The time that rawdog will wait before considering a feed unreachable
+# when trying to connect. If you're getting lots of timeout errors and
+# are on a slow connection, increase this.
+# (Unlike other times in this file, this will be assumed to be in
+# seconds if no unit is specified.)
+timeout 30s
+
+# Whether to ignore timeouts. If this is false, timeouts will be reported as
+# errors; if this is true, rawdog will silently ignore them.
+ignoretimeouts false
+
+# Whether to show Python traceback messages. If this is true, rawdog will show
+# a traceback message if an exception is thrown while fetching a feed; this is
+# mostly useful for debugging rawdog or feedparser.
+showtracebacks false
+
+# Whether to display verbose status messages saying what rawdog's doing
+# while it runs. Specifying -v or --verbose on the command line is
+# equivalent to saying "verbose true" here.
+verbose false
+
+# Whether to attempt to fix bits of HTML that should start with a
+# block-level element (such as article descriptions) by prepending "<p>"
+# if they don't already start with a block-level element.
+blocklevelhtml true
+
+# Whether to attempt to turn feed-provided HTML into valid HTML.
+# The most common problem that this solves is a non-closed element in an
+# article causing formatting problems for the rest of the page.
+# For this option to have any effect, you need to have PyTidyLib or mx.Tidy
+# installed.
+tidyhtml true
+
+# Whether the articles displayed should be sorted first by the date
+# provided in the feed (useful for "planet" pages, where you're
+# displaying several feeds and want new articles to appear in the right
+# chronological place). If this is false, then articles will first be
+# sorted by the time that rawdog first saw them.
+sortbyfeeddate true
+
+# Whether to consider articles' unique IDs or GUIDs when updating rawdog's
+# database. If you turn this off, then rawdog will create a new article in its
+# database when it sees an updated version of an existing article in a feed.
+# You probably want this turned on.
+useids true
+
+# The fields to use when detecting duplicate articles: "id" is the article's
+# unique ID or GUID; "link" is the article's link. rawdog will find the first
+# one of these that's present in the article, and ignore the article if it's
+# seen an article before (in any feed) that had the same value.  For example,
+# specifying "hideduplicates id link" will first look for id/guid, then for
+# link.
+# Note that some feeds use the same link for all their articles; if you specify
+# "link" here, you will probably want to specify the "allowduplicates" feed
+# argument (see below) for those feeds.
+hideduplicates id
+
+# The period to use for new feeds added to the config file via the -a|--add
+# option.
+newfeedperiod 3h
+
+# Whether rawdog should automatically update this config file (and its
+# internal state) if feed URLs change (for instance, if a feed URL
+# results in a permanent HTTP redirect). If this is false, then rawdog
+# will ask you to make the necessary change by hand.
+changeconfig true
+
+# The feeds you want to watch, in the format "feed period url [args]".
+# The period is the minimum time between updates; if less than period
+# minutes have passed, "rawdog update" will skip that feed. Specifying
+# a period less than 30 minutes is considered to be bad manners; it is
+# suggested that you make the period as long as possible.
+# Arguments are optional, and can be given in two ways: either on the end of
+# the "feed" line in the form "key=value", separated by spaces, or as extra
+# indented lines after the feed line.
+# possible arguments are:
+# id                  Value for the __feed_id__ value in the item
+#                     template for items in this feed (defaults to the
+#                     feed title with non-alphanumeric characters and
+#                     HTML markup removed)
+# user                User for HTTP basic authentication
+# password            Password for HTTP basic authentication
+# format              "text" to indicate that the descriptions in this feed
+#                     are unescaped plain text (rather than the usual HTML),
+#                     and should be escaped and wrapped in a <pre> element
+# X_proxy             Proxy URL for protocol X (for instance, "http_proxy")
+# proxyuser           User for proxy basic authentication
+# proxypassword       Password for proxy basic authentication
+# allowduplicates     "true" to disable duplicate detection for this feed
+# maxage              Override the global "maxage" value for this feed
+# keepmin             Override the global "keepmin" value for this feed
+# define_X            Equivalent to "define X ..." for item templates
+#                     when displaying items from this feed
+# You can provide a default set of arguments for all feeds using
+# "feeddefaults". You can specify as many feeds as you like.
+# (These examples have been commented out; remove the leading "#" on each line
+# to use them.)
+#feeddefaults
+#	http_proxy http://proxy.example.com:3128/
+#feed 1h http://example.com/feed.rss
+#feed 30m http://example.com/feed2.rss id=newsfront
+#feed 3h http://example.com/feed3.rss keepmin=5
+#feed 3h http://example.com/secret.rss user=bob password=secret
+#feed 3h http://example.com/broken.rss
+#	format text
+#	define_myclass broken
+#feed 3h http://proxyfeed.example.com/proxied.rss http_proxy=http://localhost:1234/
+#feed 3h http://dupsfeed.example.com/duplicated.rss allowduplicates=true
+feed 3h https://spragg-ssl.co.uk/~adam/blog/index.rss20
diff --git a/rawdog/item.template b/rawdog/item.template
new file mode 100644
index 0000000..76552b3
--- /dev/null
+++ b/rawdog/item.template
@@ -0,0 +1,8 @@
+<article class="feed-__feed_hash__ feed-__feed_id__" id="item-__hash__">
+<header>
+<h2><span class="itemtitle">__title__</span> <span class="itemfrom">[__feed_title__]</span></h2>
+</header>
+__if_description__<div class="itemdescription">
+__description__
+</div>__endif__
+</article>
diff --git a/rawdog/page.template b/rawdog/page.template
new file mode 100644
index 0000000..60c695b
--- /dev/null
+++ b/rawdog/page.template
@@ -0,0 +1,34 @@
+<!DOCTYPE html>
+<html>
+	<head>
+		<title>Blog</title>
+		<link rel="stylesheet" href="/style/main.css" type="text/css">
+		<meta name="robots" content="noindex,nofollow,noarchive">
+		__refresh__
+	</head>
+	<body>
+		<header>
+			<h1>Blog</h1>
+			<nav>
+				<ul>
+					<li><a href="/">Home</a></li>
+					<li><a href="/projects">Projects</a></li>
+					<li class="selected"><a href="/blog">Blog</a></li>
+					<li><a href="/privacy">Privacy</a></li>
+					<li><a href="/contact">Contact</a></li>
+				</ul>
+			</nav>
+		</header>
+		<main>
+			<section class="items">__items__</section>
+			<section class="feeds">
+				<h2>Feeds</h2>
+				__feeds__
+			</section>
+		</main>
+		<footer>
+			<p id="aboutrawdog">Generated by <a href="http://offog.org/code/rawdog.html">rawdog</a> version
+				__version__</p>
+		</footer>
+	</body>
+</html>